The Emtek Ampliramp has a solid floor walkboard with carrier engineered to store & roll out from under the truck body.Also, anti-rattle spring, full one inch I-beam floor, and extruded grip handles. Available in lengths from 10 to 16 foot.

The R.O.M. RoadwarrioR safety walkramp is a lightweight, reversible ramp that outperforms the competition in safety, durability and cost savings. It was designed for the food distributor to improve safety, delivery speed and bottom line results.

ROM RoadWarrioR

MELCHER EASY-SLIDE ramps are available in four lengths, 7 1/2, 10, 12, and 14 foot. Width is 26 inches out-side with 24 inches useable. Divided ramps for 4-wheel equipment with tread wider than 26" are also available. For mounting clearance, overall dimensions of the storage frame are 5 3/4 inches deep, 26 3/4 inches wide, and 1/2 inch longer than the length of the ramp.

Melcher EZ slide

Load electronic equipment, pianos, or other items weighing up to 3,000 pounds with Melcher's 36-inch-wide, single walk ramps. For curb-side loading where working height from truck to ground is 22 inches or less, you can use Melcher's shorter 7530 model with 3,000-pound capacity. Melcher's re-inforced, fiberglass construction makes these heavy duty ramps strong, yet lightweight. Supertraction surface provides secure footing for handling difficult, heavy loads.
HD Ramp


Whereas tractor-trailer combinations loaded to full capacity will show almost no change in fuel economy from aerodynamic improvements until reaching speeds beyond 55 MPH, vehicle weights below 18,000 GVW show improvements at much slower speeds. At highway speeds, the Nose Cone saves 10% to 15% on average (depending on the wind direction), but even at inner city delivery speeds mileage is increased by as much as 5%.


Steel Boxes
Standard Sizes:

18"H x 18"D x Length
18"H x 24"D x Length
24"H x 24"D x Length
Standard Lengths: 24", 30", 36", 48", 60", 72"
Steel toolboxes are maunfactured with a black powdercoat primer finish. Available in Drop-Down, Double Swing or Side Swing Door configurations.

Aluminum Boxes
Standard Sizes:

18"H x 18"D x Length
18"'H x 24"D x Length
24"H x 24"D x Length
Standard Lengths: 24", 30", 36"', 48", 60", 72"

Available in Drop-Down, Double-Swing or Side-Swing Door configurations. Your choice of smooth or diamond plate aluminum body and/or doors. (Additional charges may apply.)